The Polymer80 PF940V2 Jig Kit for PF940V2 Frame Blanks comes complete with essential parts as described: Polymer80 PF940V2 Jig Kit For PF940V2 Frame Blanks This jig kit is the essential companion for completing a PF940V2 frame blank from Polymer80. Designed specifically for the full-size PF940V2 platform, this kit provides the precision tooling required to correctly drill and route the frame pockets, pin holes, and trigger housing channel. Without this jig, a PF940V2 frame blank cannot be finished to a functional state. It is a single-use, disposable jig that ensures proper alignment and tolerances for the build process. The polymer80 pf940v2 jig kit for pf940v2 frame blanks includes all necessary drill bits, end mills, and alignment pins to match the PF940V2 frame geometry exactly. Overview The Polymer80 PF940V2 Jig Kit is a factory-manufactured tooling package intended for use exclusively with Polymer80 PF940V2 frame blanks. The jig body is molded from high-impact polymer and features numbered reference points that correspond to the drilling sequence in the instruction manual. It holds the frame blank in a fixed position while the user completes the material removal steps. The kit includes three hardened steel drill bits (1/8 inch, 3/16 inch, and 5/32 inch), one 3/16 inch end mill for the trigger pocket, and two stainless steel alignment pins. This polymer80 pf940v2 jig kit for pf940v2 frame blanks is not compatible with PF940C, PF940SC, or PF9SS frame blanks. The jig is designed for one complete build cycle and should be discarded after use. Features & Specs Manufacturer-specified jig for PF940V2 full-size frame blanks; includes pre-drilled alignment holes and slot guides for the trigger housing and locking block. Contains three precision-ground drill bits (1/8 in, 3/16 in, 5/32 in) and one 3/16 in four-flute end mill with a 1/4 inch shank for pocket cutting. Includes two 3/16 inch diameter stainless steel locating pins for frame-to-jig alignment; jig dimensions are 8.25 in x 2.5 in x 1.5 in. The jig kit also includes a user manual with step-by-step instructions for drilling the three pin holes and routing the trigger channel. The end mill bit is designed to cut polymer material only and should not be used on metal components. All bits are pre-sharpened and ready for immediate use. The polymer80 pf940v2 jig kit for pf940v2 frame blanks ships as a sealed kit from the manufacturer. Who It's For This jig kit is intended for individuals who possess a PF940V2 frame blank and require the specific tooling to complete the frame finishing process. It is suitable for hobbyist builders, gunsmiths, and anyone performing a single PF940V2 build. The kit assumes the user has access to a drill press or handheld power drill with a 3/8 inch chuck. It is not for use with completed frames, serialized receivers, or frames from other manufacturers. The polymer80 pf940v2 jig kit for pf940v2 frame blanks is a consumable item and is not intended for commercial production or repeated use. Users should have basic familiarity with drilling polymer materials and following dimensional instructions. This kit does not include the frame blank itself. Designed for the PF940V2 full-size frame blank only; not interchangeable with compact or subcompact frames. Requires the user to provide a power drill, safety glasses, and a workbench or clamp setup. Includes all consumable tooling for one complete build; replacement bits are not included. Shipping & FFL This item ships directly to your residential or business address. No Federal Firearms License (FFL) transfer is required for this product because it is a jig and tooling kit, not a firearm receiver or frame. The jig itself is not a regulated firearm component under federal law. However, the PF940V2 frame blank that this jig is used with is a firearm frame and must be transferred through a licensed FFL dealer in compliance with all applicable federal, state, and local laws. Always verify your local regulations regarding frame blanks and jig kits before purchasing. This polymer80 pf940v2 jig kit for pf940v2 frame blanks is sold as a tooling accessory only. No FFL transfer required for the jig kit; ships via standard ground carrier. Buyer is responsible for verifying that frame blank ownership and finishing is legal in their jurisdiction. Return policy applies to unopened kits only; opened jigs cannot be returned due to single-use consumable nature.

No. This product is a part or accessory and does not require an FFL for purchase or shipping.

While Polymer80 PF940V2 Jig Kit for PF940V2 Frame Blanks is legal in most states, always verify your local laws before placing an order. We comply with all state regulations.

In most cases, yes — Glock-compatible frames are designed to accept Glock OEM and compatible magazines. Always confirm fitment in the product details.

That depends on your state’s concealed carry laws. Once properly serialized and registered, carrying may be allowed under state law.

We ship all over the USA within 1–3 business days. You will receive tracking once shipped. Delivery times vary by carrier and region.