The RL556v3 80% AR15 Lower – OD Green comes complete with essential parts as described: RL556V3 80% AR15 Lower – OD Green The RL556V3 80% AR15 Lower in OD Green is a precision-machined component designed for builders who demand exacting tolerances and reliable material composition. Manufactured from 7075-T6 aluminum, this 80% lower receiver provides the structural integrity required for duty-grade AR-15 builds while offering the flexibility of a complete DIY platform. The OD Green Cerakote finish is applied using a MIL-SPEC standard process, ensuring consistent coverage and resistance to corrosion, chemicals, and abrasion. This component is compatible with standard AR-15 mil-spec upper receivers and lower parts kits, making it a straightforward integration into your existing project or a fresh build. The RL556V3 designation reflects the manufacturer's commitment to repeatable quality across their production runs, with each unit inspected for critical dimensional compliance before packaging. Overview The RL556V3 80% AR15 Lower – OD Green is a raw, unfinished lower receiver that requires final machining to complete the fire control pocket and trigger pin holes. This 80% variant allows the builder to legally manufacture a firearm for personal use without serialization or FFL transfer, provided local, state, and federal laws are followed. The receiver is machined from a solid 7075-T6 aluminum billet, then Type III hard anodized and finished with OD Green Cerakote for enhanced durability. The RL556V3 platform is optimized for the AR-15 pattern, accepting all standard components from bolt catch to magazine release. The OD Green color variant is a flat, non-reflective military-grade finish that minimizes visual signature while providing excellent scratch resistance. Each receiver includes the factory pocket and takedown pin lug areas pre-drilled to 80% completion, leaving only the trigger and hammer pin holes, safety selector hole, and fire control cavity to be finished by the builder. Features & Specs The RL556V3 80% AR15 Lower – OD Green incorporates several engineering features that distinguish it from economy-grade blanks. The receiver is CNC machined from 7075-T6 aluminum, which offers a tensile strength of 83,000 psi and a yield strength of 73,000 psi, significantly higher than 6061-T6 alternatives. The OD Green Cerakote is applied at a thickness of 0.002 to 0.003 inches, providing a hard, ceramic-based barrier against sweat, solvents, and environmental moisture. The trigger pocket is machined to a depth of 1.250 inches with a width of 0.620 inches, exceeding SAAMI minimum specifications for aftermarket trigger compatibility. The RL556V3 also features a flared magazine well with a 0.125-inch chamfer on each side, facilitating faster reloads with standard or extended magazines. Key dimensional tolerances include a trigger pin hole diameter of 0.154 inches (pre-drilled pilot, not final), a hammer pin hole diameter of 0.154 inches (pre-drilled pilot), and a safety selector hole diameter of 0.250 inches (pre-drilled pilot). The receiver weight is 11.8 ounces before finishing, and the overall length is 9.750 inches, matching mil-spec AR-15 lower receiver dimensions. Material: 7075-T6 aluminum billet, heat-treated to T6 temper Finish: OD Green Cerakote over Type III hard anodize Weight: 11.8 ounces (unfinished) Dimensions: 9.750 inches overall length, 1.140 inches width at magazine well Pre-drilled: Trigger, hammer, and safety selector pilot holes Compatibility: All standard AR-15 mil-spec components and lower parts kits Flared magazine well with 0.125-inch chamfer for improved reload speed Integral trigger guard machined from billet, no separate part required Reinforced rear take-down pin lug with 0.200-inch wall thickness Bolt catch pocket pre-machined to accept standard AR-15 bolt catches Magazine release pocket pre-machined to accept standard AR-15 magazine releases All exterior surfaces finished in OD Green Cerakote for uniform appearance Includes: One (1) RL556V3 80% AR15 Lower – OD Green Includes: Build instructions and legal compliance guide Does not include: Jig, drill bits, or finishing tools Does not include: Lower parts kit, buffer tube, or stock Does not include: Upper receiver or barrel Who It's For The RL556V3 80% AR15 Lower – OD Green is intended for experienced builders who possess the necessary tooling and machining skills to complete an 80% lower receiver. This product is suitable for hobbyists, gunsmiths, and firearms enthusiasts who wish to construct a firearm for personal use without federal serialization requirements. The OD Green finish is particularly appropriate for builders assembling a rifle intended for hunting, tactical training, or outdoor recreational shooting where low-visibility coloration is preferred. This RL556V3 80% lower is also a practical choice for those who want to build multiple receivers with consistent dimensional quality, as the RL556V3 platform offers repeatable tolerances across production batches. Builders should have access to a drill press or milling machine, appropriate end mills, and a jig designed for 80% AR-15 lowers to complete the fire control pocket and pin holes. Shipping & FFL This RL556V3 80% AR15 Lower – OD Green is classified as a non-firearm component under federal law and does not require transfer through a Federal Firearms License (FFL) dealer. It ships directly to residential addresses in all states where possession of 80% receivers is legal. However, customers are solely responsible for ensuring compliance with all applicable local, state, and federal laws before purchasing and completing this receiver. Some states and localities impose restrictions on the possession, purchase, or completion of 80% lower receivers, including but not limited to California, New York, New Jersey, Connecticut, Washington, and the District of Columbia. This product may not be shipped to these jurisdictions. By purchasing this RL556V3 80% AR15 Lower – OD Green, you represent that you are legally eligible to possess and manufacture a firearm in your jurisdiction. No FFL transfer documentation is required for shipping, but all applicable laws regarding the manufacture of a firearm for personal use must be followed upon completion. Failure to comply with local laws may result in legal liability. This product is sold as a raw, unfinished component and is intended solely for personal use in compliance with all applicable regulations.

No. This product is a part or accessory and does not require an FFL for purchase or shipping.

While RL556v3 80% AR15 Lower – OD Green is legal in most states, always verify your local laws before placing an order. We comply with all state regulations.

In most cases, yes — Glock-compatible frames are designed to accept Glock OEM and compatible magazines. Always confirm fitment in the product details.

That depends on your state’s concealed carry laws. Once properly serialized and registered, carrying may be allowed under state law.

We ship all over the USA within 1–3 business days. You will receive tracking once shipped. Delivery times vary by carrier and region.